User's Manual Allegro Central Vacuum Power Unit

Allegro Central Vacuum  

OPERATING AND MAINTENANCE INSTRUCTION MANUAL

 IMPORTANT SAFETY INSTRUCTIONS

With and without headlight do not put any object into vacuum intake openings. Do not use with any opening blocked. Keep vacuum intake openings free of dust, lint, hair or anything that may reduce airflow. This nozzle creates suction and contains a revolving brush roll. Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts. Do not place motorized nozzle on furniture or stairs as the brush roll may cause damage. Place nozzle on floor with the handle in storage position while using attachments. Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes. Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt. Use extra care when cleaning on stairs. Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas when they may be present. Store your nozzle indoors in a cool, dry area. Keep your work area well lighted.Unplug electrica appliances before vacuuming them. 

When using an electrical appliance, basic precautions should always be followed, including the following:

Allegro Central Vacuum Cleaning System represents the very best in design for your safe operation. However, as with any Powerful appliance, caution must be exercised while using this Central Vacuum System. The safety precautions and instructions for maintenance outlined in this manual are important. When using the Allegro Central Vacuum System, the following basic precautions should always be adhered to:

READ ALL INSTRUCTIONS BEFORE USING THIS CENTRAL VACUUM CLEANING SYSTEM, AND BE SURE TO SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

WARNING: To reduce the risk of fire, electric shock, or injury:

1. Unplug from outlet before servicing.

2. This appliance is designed for household use only. Do not use on wet surfaces. Do not use outdoors or pick up (vacuum in) wet objects.

3. Do not allow to be used as a toy. Close attention is necessary when used by or near children.

4. Use only as described in this manual.

5. Do not use with damaged cord or plug. If not working properly, has been dropped, damaged, left outdoors or otherwise got wet, call or take to service centre.

6. Do not pull or carry by cord, use cord as handle, close door on cord or pull cord around sharp edges or corners. Keep cord away from heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp plug, not cord.

8. Do not handle plug or appliance with wet hands.

9. Do not put any objects into openings. Do not use with any openings blocked. Keep openings free of lint, hair dust or anything that may reduce air flow.

10. Keep hair or loose clothing away from opening and moving parts. Keep suction openings away from eyes, ears, mouth or any other delicate body parts.

11. Power off all controls prior to unplugging. Make sure it is inoperative prior to connecting or disconnecting accessories.

12. Use extra care when cleaning on stairs.

13. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.

14. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

15. Do not pick up sharp objects, especially if using a current carrying hose. Such a hose contains electrical wires do not use it if damaged, cut or punctured.

16. Connect to a properly grounded outlet. See grounding instructions.

17. Do not use without filter in place.

OPERATION

Each inlet valve is connected to the main power unit by a low voltage (24v dc) supply. This allows the main power unit to start from a remote location (i.e. inlet valves). The power unit should be plugged in to the main outlet at all times. To operate your Power Unit plug the hose into the wall inlet valve in the house or plug your garage hose (optional) into the utility valve on the power unit and use the ON/OFF switch (optional) to start the power Unit. To turn the power unit OFF remove the hose from the inlet valve.

If your hose is equipped with a control switch on the handle, then you will be able to operate (turn ON/OFF) the Power Unit at your fingertip.

MAINTENANCE

Allegro is designed with an exclusive Filtration system which provides complete protection of the electric blower motor fan assembly. Your main power unit requires minimum maintenance. It is normal for some dirt and lint to cling to the filter. For best results, empty the pail when half full.

FILTER MAINTENANCE

Some models use disposable paper filter-bag, supported by a permanent filter. If you have this model, simply replace the disposable paper filter-bag when almost full. New paper bags can be ordered from your nearest Authorized Retailer.

MICRO-FIBRE FILTER

WARNING: Do not remove or wash the Micro-Fibre Filter to improve the power unit airflow and the performance, once a year you may follow the steps below:

1. Undo the latches and remove dirt pail from the power unit.
2. Wrap a large plastic garbage bag around the lower portion of the Power Unit, so that the filter is contained within the garbage bag.
3. Hold the filter through the plastic bag and shake, so the dirt will drop into the bag.
4. Remove the plastic bag from the unit. Empty the contents of the dirt pail into the plastic bag.
5. Re-attach the dirt pail to the power unit. To re-attach simply hook both latches to the body. The dirt pail should hang freely. Now, use both hands to simultaneously engage both latches. It is not recommended to engage one latch at a time.

This appliance is supplied with a power supply cord that is approximately 5ft (1.5m) long. It should be mounted in such a way to enable the power supply cord to be connected directly into an electrical outlet. An extension cord should not be used.

Mount appliance at least 12" from ceiling, floor and side wall(s) to ensure adequate ventilation for motor. Do not install in a confined space like a cabinet or closet. Do not vent exhaust air into wall, ceiling or concealed space of building.

GROUNDING INSTRUCTIONS

This appliance must be grounded; if it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING:
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal ~120 volt circuit and has a grounding attachment plug that looks like the plug illustrated in Figure 1. Make sure that the appliance is connected to an outlet having the same configuration as the plug. Adapter should not be used with this appliance.

NOTE:
In Canada, the use of a temporary adapter is NOT permitted by the Canadian Electrical Code.