CALL: 1-877-593-2532 | 10AM - 6PM EST MON - SAT
Cart subtotal {{total}} USD Recently added item(s):
Shopping cart is empty
{{item.code}} - {{item.name}}
{{item.qty}} x {{item.pricec}} {{item.curr_code}}
Product Finder Enter phrase: or Select Filtration:
Select Cleaning Area:
Select Suction Power:
Select Air-Power:
Select Motor:
Select Power Unit Voltage:
Select Powerhead Operating Voltage:
Select Hose Length:
Select Hose Operating Voltage:
Select Hose Configuration:
Vacuum comparison
No items selected
OTHER BRANDS

PRODUCT / Vacuum Cleaner Replacement Parts / ZAS098-BT

ZAS098-BT

Replacement Drive Belt for ZAS098 Electrolux Aero III Powerhead

  


DISCONTINUED - NO LONGER AVAILABLE



SUGGESTED REPLACEMENT: ZAS099

 

 

How to Replace Belt or Light Bulb Electrolux Aero III Power Nozzle | ZAS098 Powerhead

 

NOTE: Turn off the switch and unplug the electrical cord before replacing belt or bulb. Pulleys can become hot during normal use. To prevent injury, avoid touching the pulley when servicing the drive belt. Refer to diagrams on the following pages.

1.   Remove six screws from bottom side. Turn unit over; pull up on hood to remove.

      Replace light bulb if necessary.

      Continue to step 2 to change belt. Skip to step to place hood.

2.   Lift out brush roll and discard used belt.

3.   Put new belt around brush roll pulley first; then the pulley.

4.   Place left end cap into base.

5.   Pull right end of brush roll to stretch belt. Secure right end cap into base.

6.   Rotate brush roll to seat belt.

7.   Position hood; secure with screws.

Qty.:
6.99 USD
Add to cart

Get In Touch With Us Today!

Please enter the letters from the image below
Enter the code